Steel Fabricator Shop Capabilities
FABRICATOR | LENGTH* (ft.) | DEPTH (ft.) | CRANE CAPACITY (tons) |
|---|---|---|---|
| Fabricator #1 | 137.8 | 12 | 60 |
| Fabricator #2 | 134.8 | 12 | 36 |
| Fabricator #3 | 124.0 | 12 | 25 |
| Fabricator #4 | 140.1 | 10 | 40 |
| Fabricator #5 | 120.1 | 8 | 26 |
The information above represents the shop capacities of several companies that commonly fabricate girders for KDOT. These limits are for a girder "piece", not the entire girder. Designers should consider this information when setting splice locations on larger girders.
* Lengths are based on the longest girder each shop has fabricated and shipped. Transportation issues should also be considered.
